Monday, November 3, 2014

Nokia Lumia 710 / 800 / 800C TP BOOT REPAIR Solution Here

 Nokia Lumia 710 / 800 / 800C TP BOOT REPAIR Solution Here
The solution described below is for phones with "un-alligned" or corrupted AMSS + ADSP Region caused by improper custom firmware flashing or by other means of data corruption.

Here is sample logs showing the error during Normal USB Flashing:
================================================== ======
Sending OSBL Certificate HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes

ERROR: Data Rejected at SEQ 0x3
STEP 1:In order to fix this problem, you first need to write QUALCOMM OSBL to your phone via TP Method.
Select Correct Phone Type and make sure M.B.R. + SEC_BOOT + OSBL QCOM is selected as well. Then click REPAIR BOOT!!!

STEP 2:Remove USB Cable and press and hold POWER BUTTON for 18 Seconds. Then press and hold VOLUME UP Button while connecting the USB Cable to the phone.
*** Your Phone should now be detected as a New HDD Device and Windows will ask you to FORMAT IT... Of course
Download the proper RAW BOOT Files for your phone.

Lumia 710 RM-803 and RM-809
Lumia 800 RM-801 and RM-819
Lumia 800C RM-802STEP 4:
Go to eMMC Direct tab in ATF Software and click "Scan Partitions". If your phone is NOT DETECTED, go back to STEP 2. Repeat Step 2 until your phone is DETECTED Properly.

After ATF Software successfully Lists the Partitions Found on the Phone, click "Backup Phone Data" so you will save your IMEI, Simlocks and other important data safely.

Now Let us write Boot Files which you downloaded from Step 3.
Extract the RAR file and then write the 3 RAW Boot Files 1 by 1:
5a. dbl_RM-XXX.bin <--- Write this to 0x4D - DBL Partition
5b. osbl_nokia_RM-XXX.bin <--- Write this to 0x46 - OSBL Partition
5c. amss_adsp_RM-XXX.bin <--- Write this to 0x0C - AMSS_ADSP Partition
5a - DBL

STEP 6:Click "SP UNLOCK" if you want to unlock your phone after fixing the BOOTS.

Flash the WP_OS partition using your regular ESCO Flash Files. This will have the same effect as you will flash the phone via USB... but via eMMC Direct, it is faster and does not care if your KEYSTORE is damaged or erased.

Write Flash file to 0x48 WP_OS Partition.

Flash File should be the BOOT file and should be more than 300 MB in size.

It looks like this:

RMxxx_11111_prod_111_11_boot.esco <--- 300+ MB

Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website we will not be responsible for any loss or damage, including personal injury.for more detail read Terms & Conditions and Privacy & Policies at bottom. Restore Hard reset will set your phone in origional factorry settings. It will remove all the data and apps that you installed. Your contacts will be removed and you have to add them again. Flash Firmware we try to provide the best and latest flash files and firmwares, But we do not guarantee the accuracy or compatibility of any of the files. So use them at your own risk..


Post a Comment


Twitter Bird Gadget